ALFATRON ALF-5/10/12/20X/30X-CAM
2) Stream Release
Switch:
To turn on / off the main or secondary stream.
Protocol:
Primary / Secondary stream applies RTMP protocol.
Host Port:
Server port number (default 1935,0-65535 optional)
Host Address:
Server IP addresses (default 192.168.5.11)
Stream Name:
Choose a different stream name (live / av0,live / av1 optional).
User:
Set the user name.
Password:
Set the password.
Click the "Save" button to display the "Save successful" message, then settings will take effect.
Method of obtaining RTSP: rtsp://[device IP address]:554/live/av0 (av0 main stream; av1 secondary stream)
3) RTP Broadcasting
Main/Sub Stream
：
On/off
；
Protocol
：
RTP or TS
Address
：
Default
224.1.2.3. It can be edited.
Port
：
Main Stream Default Port:
4000, Sub Stream Default Port: 4002
）
Visit
：
Address comes up after setting. Eg; RTP://224.1.2.3:4000; udp://@224.1.2.3:4000;
4) Video Parameters
A. Focus: Focus mode, focus range, focus sensitivity can be set.
Focus Mode: set the focus mode (the default auto, manual optional)
Focus range: set the focus range (the default middle, the upper and lower optional)
Focus Sensitivity: Set the focus sensitivity (default is low, the high and medium optional)
B. Exposure:
Exposure mode, exposure compensation, back light compensation, anti-flicker, gain limit, wide dynamic, shutter
speed, aperture value and brightness can be set.
Exposure Mode:
Set the exposure mode (default mode automatic; manual shutter priority, aperture priority, brightness
priority optional)
Exposure Compensation:
Exposure compensation setting is active when it is in auto status (default is off).
Exposure compensation value:
Set the exposure compensation value, valid when it is set for auto (default 0,-7 to 7 optional).
BLC
: Set backlight compensation, valid when it is auto status (default is off).
Anti-flicker:
Set up anti-flicker mode, valid when status of automatic, aperture or brightness priority (default
50Hz,closed,60Hz optional).
Gain limit:
Set the gain limits, auto, active when status of aperture or brightness priority (default 3, 0-15 optional).
Dynamic range:
set the dynamic range (default 5, 0-8 optional).
Shutter speed:
active when status set to manual or shutter-priority; default 1/100 (1/25, 1/30, 1/50, 1/60, 1/90, 1/100,
1/120, 1/180, 1/250, 1/350, 1/500, 1/1000, 1/2000, 1/3000, 1/4000, 1/6000, 1/10000 optional).
Aperture value:
Set the aperture value, active when it is status of manual or aperture-priority; default F1.8 (closed, F11, F9.6,
F8.0, F6.8, F5.6, F4.8, F4.0, F3.4, F2 .8, F2.4, F2.0, F1.8 optional).
Brightness:
Set the brightness value, active when state set to brightness priority; default 7 (0-23 optional).
C. Color:
White balance, saturation, colour, white balance, sensitivity, colour temperature, gain red and blue gain can be set.
White balance modes:
Set the white balance mode; default automatic (3000K, 4000K, 5000K, 6500K, manual, One-push
optional).
Note: Click the “Correction” button when selecting the One-push white balance mode.
Saturation:
Set the saturation (default 80%; 60%, 70%, 80%, 90%, 100%, 110%, 120%, 130%,optional).
Auto white balance Sensitivity:
Sensitivity Auto white balance settings (default is low; high/ medium optional).
Chroma
: Set the chrome (default 7; 0-14 optional).
Color Temperature:
Set color temperature (Default setting High; low/ middle is optional)
Red Gain
: Set the red gain, effective when it is manual (default 255; 0-255 optional).
Blue Gain:
Sets the Blue gain, effective when it is manual (default 199; 0-255 optional).
D. Image:
Brightness, Contrast, Sharpness, Black and White mode, Gamma curve, Horizontal Flip and Vertical Flip can be set.
Brightness:
Set the brightness (default 6; 0-14 optional).
Contrast:
Set the contrast (default 8; 0-14 optional).
Sharpness
: Set the sharpness value (default 7; 0-15 optional).
Black and white mode:
Set black and white mode (default colour; black / white optional ).
Gamma
: Gamma value setting (default 0.45; 0.50, 0.52, 0.55 optional).
Flip Horizontal
: Set Flip Horizontal (default Off; On optional).
Flip Vertical:
Set vertical flip (default Off; On optional).
E. Noise Reduction: 2D noise reduction,3D noise reduction and dynamic dead pixel correction available.
2D Noise Reduction
: Set 2D noise reduction level (default Auto; 1-7 and Off optional).
3D Noise Reduction
: Set 3D noise reduction level (default 5; 1-8 and Off optional).
Dynamic dead pixel correction:
Set Dynamic dead pixel correction (default Off; 1-8 optional).
