ALFATRON ALF-5/10/12/20X/30X-CAM
26
To update the file:
Click "Browse ..." installation, and select the upgrade file in the pop-up window.
Click on the "Upgrade" button. The upgrade dialogue will appear and the device will automatically reboot after the update is
successfull.
Note: Ensure the power and network is always connected during the process or the upgrade will fail
Note: After the version upgrade is complete, you will need to restore factory defaults:
A.
Through the web interface to restore the factory default configuration,
B.
Through the recovery menu,
C.
Through the remote control shortcut * # 6;
Should you use the web interface, passwords will also be restored to the default.
5) Restore factory setting
Click on the "Restore Factory Defaults" button and choose “yes” to factory default, the device will restart automatically and be
restored to the factory default setting.
6) Reboot
Click on the "Reboot" button and choose “yes”, the device will automatically restart.
4.2.7 Logout
Point to the "Logout" pop-up, In the "Confirmation" dialogue window; select "Yes" or "No". Choose “Yes” to exit the current page and
return to the user login interface again.
4.2.9 Wireless network
Should the user equipment have a wireless network module, enter the Web page "Network Configuration" or "Wireless Network"
configuration page. The configuration is as follows:
1
）
Network settings
Wireless network
configuration:
(only applicable to WiFi model cameras)
Network interface enabled:
DHCP:
If checked, device can obtain the IP automatically.
IP address:
Set wireless WIFI IP (default 192.168.1.250, if checked DHCP, IP will be assigned automatically)
Note:
Wireless IP address can not be in the same segment as the wired IP address.
Subnet Mask:
Set the wireless IP subnet mask (Default: 255.255.255.0)
Default Gateway:
Set the wireless IP default gateway (Default: 192.168.1.1)
SSID:
Can be modified by the user (default-test)
Encryption:
If checked, the password can be set.
Password:
Password can be changed only if the encryption is enabled.
Click on the "Save" button, when "Parameter saved successfully" message is displayed the save is valid.
Note:
The SSID and password should be filled in correctly or else, when restarted and the device is powered off, the wireless WiFi
connection will not be successful.
2)WiFi hotlink
Click on the “search” button to search the WIFI hotspot.
Double-click the dialogue box after searching user WIFI hotspot, then input the password to connect to the WIFI. Once
connected successfully “successful connect” will be displayed.
3)Wireless WiFi log in page
If the IP address is not obtained via DHCP, then open the browser and enter the wireless network IP address in the address bar
(default 192.168.1.250). If DHCP is selected, IP is automatically obtained, login via the user interface settings to view the
allocation of IP addresses.
