ALFATRON ALF-5/10/12/20X/30X-CAM
34
5) Serial control not working.
A.
Check whether the camera serial device protocol, baud rate and address is set correctly.
B.
Check whether the control cable is properly connected.
C.
Check whether the camera mode is in the normal operating mode (see Table 2.2 and Table 2.3)
6) Cannot login via the Webpage
A. Check whether the camera is displaying normally.
B. Check whether the network cable is connected properly (Ethernet port yellow light will flash to indicate normal network
cable connection)
C.
Check whether your computer is within the correct IP segment and that the segment is consistent with the IP address of
the camera.
D. Troubleshooting IP connection from Windows Command Prompt.
Click "Start" menu button in windows OS and select "Run". Then type “cmd” in the text window and click "OK" to enter
the DOS command prompt window.
Type in “ping 192.168.5.163” (default address) or ‘Ping xxx.xxx.xxx.xxx if an alternate IP address was previously configured.
The system will return a message “Reply from 192.168.5.163: bytes=32 time=1ms TTL=64” if successful IP connection
exists.
If system returns a message “Reply from 192.168.5.163: Destination host unreachable.”, the recheck network connections
and IP address.
