ALFATRON ALF-5/10/12/20X/30X-CAM
10
3.Application Instruction
3.1 Video Output
3.1.1 Power-On Initial Configuration
Once connecting the power, the camera will initiate the initial configuration, the red indicator light will be flashing. When the camera
returns to the HOME position (middle position for Pan / Tilt) , the lens will zoom in/out and the auto-testing will be completed. IR LED
will also cease flashing. If the preset ‘0’ is set, the camera will rotate to the 0-preset position after initial configuration.
3.2 Remote Controller
3.2.1 Button Instruction
1. Standby Button
After a 3 second long press, the camera will step into standby mode. Long press for 3 seconds again
and the camera will self-test and return to the HOME position. (Note: If the power-on mode is
turned on and Preset 0 is set, and there is no operation within 12 seconds, the camera will
automatically point to the specified preset position.
2. Camera Address Selection
Select the camera
address
which requires control
3. Number Key
Set or run 0-9 presets
4. *,# Key
Key combination use
5. Focus Control Key
Auto Focus: Enter autofocus mode.
Manual Focus: Enter manual focus mode.
To adjust the camera focus in manual mode press [focus +] or [focus -].
6. Zoom Control Key
Zoom
＋
: Zoom in
Zoom
－
: Zoom out
7. Set or Clear Preset key:
To set the preset: Press Set Preset key and 0-9 number key
To clear the preset: Press Clear Preset key and 0-9 number key
8. Pan/Tilt Control Key
Press Key: Up
Press
Key: Down
Press
Key: Left
Press
Key: Right
“HOME” Key: Return to the middle position or enter into the next level menu
9. BLC Control Key
Back Light ON / OFF: Turn on or off the backlight
10. Menu Setting
Open or close the OSD menu
Enter/exit the OSD menu or return to the previous menu.
11. Camera IR Remote Control Address Setting
【
*
】
+
【＃】
+
【
F1
】
: Camera Address No.1
【
*
】
+
【＃】
+
【
F2
】
: Camera Address No. 2
