Alfa Plam GRANDE 37, Инструкция по использованию, техническому обслуживанию и монтажу

Страница: 18 / 28

15
By pressing P4 and P6 keys choose the desired menu or sub - menu. Use P3 key to open the desired menu or sub -
menu.
To increase or decrease parameter value press P4 or P6 keys. To save the new set parameter value press P3 key. To
cancel all modifications and return to previous values press P1 key.
After change of parameter value the new value is transferred to main controller.
If the transfer was not successful, the following message appears on the display:
In this case, it is necessary to repeat the action.
The User Manu consists of multiple menus and sub - menus.
By pressing P3 key
the User Menu opens and the following list of sub - menus is visible:
Menu Description
Combustion Management The menu for the modification of combustion power,
auger motor calibration and flue gases motor.
Heating Management The menu for the modification of set value for water
temperature in the boiler, buffer and other heating
parameters.
Chrono The menu for the Chrono program modalities and
ignition/extinguishing times.
Manual Load The menu for the manual auger loading. Possible only if
the system is in OFF state.
Time and Date The menu for setting the time and date.
Remote Control The menu for activation of the remote control.
Language The menu for change of the control panel language.
Keyboard Menu The menu for setting the contrast and the light of LCD
panel.
System Menu The menu to access the technical adjustments.
Com bus ti on Managem ent Menu
This Menu provides modification of parameters determining combustion power. It consists of four sub - menus.
By pressing P3 key the Menu opens and following sub – menus are visible:
Combustion Power
This Menu provides combustion power management of the system in Manual or Automatic Mode (if option is available).
In Manual Mode user can manage combustion power by himself.
Combustion Description
1-5 (Combustion Power 1, 2, 3, 4 and 5) Power is set manually by choosing Power 1, 2, 3, 4 or 5.
Auto (option not active) Power is set automatically by the system
Parameter Name
Maximum Value
Current Value
Minimum Value