Alfa Plam GRANDE 37, Инструкция по использованию, техническому обслуживанию и монтажу

Страница: 14 / 28

11
Consult the supplier on the type of pellet, which needs to be 30 mm in size and have a 6 mm cross-section. Proper
operation of the boiler depends on the type and quality of the pellets. The manufacturer is not in any way responsible for
poor performance of the boiler due to the use of poor quality pellets.
PELLET STORAGE
Pellets should be stored in a dry room that is not too cold. Cold and wet pellet (temperature about 5˚C) reduces the
thermal power and demands increased boiler cleaning.
People with an impaired spine and pregnant women should avoid lifting a bag of pellets.
The manufacturer waives all responsibility for any damage or improper operation of the boiler due to the use of low
quality pellets.
Pellets should be in accordance with the DIN Standard 51731, DIN plus, Ӧ-Norm -7135 or other comparable European
standards.
PELLETS SHOULD NOT BE KEPT NEAR THE BOILER. Leave a distance of at least half a meter.
When handling pellets, make sure that they are not wasted.
If you add sawdust in the pellet tank, it may block the system for dosing pellets.
10. BOILER CONTROL SYSTEM
The boiler is equipped with advanced control system which provides a safe, efficient and reliable management of the
operation and maximum functional efficiency of the boiler.
Characteristics:

easy to install and use,

easy and direct user functions,

reliable and flexible functional software specifically developed for pellet boilers,

advanced features available to installers in order to adapt different configurations and installations.