Alfa Network 4PIZZE, Руководство пользователя

Страница: 14 / 27

24 25
IN THE GARDEN
When installing the ALFA Oven
in your outdoor cooking area
with the venting away from
any structures or low ceilings,
the ALFA supplied high quality
stainless steel pipe and cap are
sufficient.
WARNING: Major causes of vent
related fires is failure to maintain
required clearances (air spaces) to
combustible materials.
Note: The outer walls of oven may reach high temperatures, more than 50°C
(125°F). Position the oven so it is not in contact with the wall or other furniture and
make sure there is a gap of at least 8 inches (20cm).
ON THE TERRACE OR
UNDER A PERGOLA
For indoor ALFA oven venting
installations, or outdoor settings
where your wood fired oven
will be under a roof structures,
pergolas, or terrace.
If you are penetrating through
an object overhead, you must
remove the single-walled pipe
provided and start with the pipes
and chimneys manufactured by
specialized companies.
If a bend is needed to change the
pipe or chimney direction to avoid
an obstruction, you can use up to (2) 30-degree or less angles but NEVER together to
form a 60-degree bend.
VENTING GUIDE
FOR WOOD FIRED AND GAS OVENS
DO NOT CONNECT THIS TO A CHIMNEY FLUE SERVING ANOTHER APPLIANCE
OFFSET ELBOW INSTALLATION:
- Avoid elbows if at all possible, as a vertical pipe or chimney is the most
efficient
- Pipe or chimney systems may have a maximum of 2 offsets (two elbows
total) of 30-degrees from vertical