Alfa Laval FrontLine ClipLine, Инструкция по эксплуатации, Страница: 67 / 68

7 Storage of the plate heat exchanger
WARNING Risk of damage to equipment.
The crate is not designed to be stacked.
Never put a load on top of the crate.
Alfa Laval delivers the plate heat exchanger ready to be put into service upon
arrival, if nothing else has been agreed.
If storing for longer periods of time, such as one month or longer, certain
precautions should be made to avoid unnecessary damage to the plate heat
exchanger. See Sections
Outdoor storage on page 67 and Indoor storage on
page 67.
NOTE
Alfa Laval and its representatives reserve the right to inspect the storage
space and/or equipment whenever necessary until the expiration of the
warranty period stipulated in the contract. Notification must be given 10
days prior to the date of inspection.
If there is any uncertainty about the storage of the plate heat exchanger,
consult an Alfa Laval representative.
7.1 Storage in crate
If storage of the plate heat exchanger after delivery is known in advance,
inform Alfa Laval when ordering the plate heat exchanger to ensure that it will
be properly prepared for storage before packing.
Indoor storage
• Store inside a room with the temperature between 15 and 20 °C (60 and 70
°F) and humidity up to 70%. For outdoor storage read Outdoor storage on
page 67.
• To prevent damage to the gaskets, there should not be any ozone-
producing equipment in the room such as electric motors or welding
equipment.
• To prevent damage to the gaskets, do not store organic solvents or acids in
the room and avoid direct sunlight, intensive heat radiation or ultraviolet
radiation.
• The tightening bolts should be well covered with a thin layer of grease. See
Section Closing on page 61.
Outdoor storage
If you need to store your plate heat exchanger outdoors, follow all the
precautions in
Indoor storage on page 67 as well as the precautions listed
below.
200000420-4-EN-GB 67
EN