Alfa Laval FrontLine ClipLine, Инструкция по эксплуатации, Страница: 17 / 68

3.2 Name plate
The type of unit, manufacturing number and manufacturing year can be found
on the name plate. Pressure vessel details in accordance with the applicable
pressure vessel code are also given. The name plate is fixed to the frame
plate, most commonly, or the pressure plate. The name plate can be a steel
plate or a sticker label.
WARNING Risk of damage to equipment.
The design pressures and temperatures for each unit are marked on the
name plate. These must not be exceeded.
CAUTION Risk of damage to equipment.
Avoid aggressive chemicals for cleaning the plate heat exchanger when a
sticker label is used.
The design pressure (11) and the design temperature (10), as given on the
name plate, are the values against which the plate heat exchanger is
approved according to the pressure vessel code in question. The design
temperature (10) may exceed the maximum operating temperature (8) for
which the gaskets have been selected for. If the operating temperatures as
specified on the PHE drawing are to be changed the supplier should be
consulted.
1. Space for logotype
2. Open space
3. Website for service
4. Drawing of possible locations of connections/Location of 3A tag for 3A
units
5. Space for mark of approval
6. Warning, read manual
7. Date of pressure test
8. Maximum operating temperature
9. Manufacturer test pressure (PT)
10. Allowable temperatures Min/Max (TS)
11. Allowable pressures Min/Max (PS)
12. Decisive volume or volume for each fluid (V)
13. Locations of the connections for each fluid
14. Decisive fluid group
15. Year of manufacture
16. Serial number
17. Type
18. Manufacturer’s name
200000420-4-EN-GB 17
Description 3 EN