9/21
ALFA IN a.s
©
www.alfain.eu
3
5.
OPERATOR CONTROLS
5.1 FRONT AND REAR PANELS
Fig. 1 PEGAS 160 PLASMA without the cooling unit
Fig. 2 PEGAS 160 PLASMA with the cooling unit
A1
Switch for setting the pneumatic system.
Middle position
– machine is in the cutting mode.
Setting the working pressure. Set the Pressure regulator A13
to working pressure 6,0 bar.
Setting the optimal air flow for the pilot arc. That is set by the
manufacturer. In case the pilot arc cannot he ignited of turns down,
amend the air flow by means of the regulator
A17
.
A2
2 stroke mode
– the torch trigger must be kept pressed during
cutting.
4 stroke mode
– the cutting process starts when you press the
torch trigger. When you release the trigger the cutting process
