Alfa IN aXe 250 mobil GAS, Инструкция по эксплуатации

Страница: 18 / 30

18/30
ALFA IN a.s. © www.alfain.eu
WELDING MODE 2T – TWO STROKE
Works for both welding methods MIG/MAG.
Press the button V20 to switch between the modes 2T , 4T and
. The two stroke mode is signalized by LED V17 . First tact: press and hold
the torch button, the machine will start welding. Second tact: release the torch
button, the machine will stop welding.
WELDING MODE 4T – FOUR STROKE
Works for both welding methods MIG/MAG.
Press the button V20 to switch between the modes 2T , 4T and
. The four stroke mode is signalized by LED V18 . First tact: press and hold
the torch button, the machine will start welding. Second tact: release the torch
button, the machine will continue welding. Third tact: press the torch button, the
machine will continue welding. Fourth tact: release the torch button, the machine
will stop welding.
WELDING MODE 2T – TWO STROKE STAIRS
Works for both welding methods MIG/MAG.
Press the button V20 to switch between the modes 2T , 4T and
. The two stroke stairs mode is signalized by LEDs V17 and V19 .
First tact: press and hold the torch button, the machine will start welding with the
Start current
SCu during the time START t S . Then after the time UP tuP start
the machine welding with the main welding current (100 %). Second tact: release
the torch button, after the time DOWN
tdo start the machine welding with the
End current ECu during the time END t E . After this time the machine will stop
welding.
WELDING MODE 4T – FOUR STROKE STAIRS
Works for both welding methods MIG/MAG.
Press the button V20 to switch between the modes 2T , 4T and
. The four stroke mode is signalized by LEDs V18 and V19 .
First tact: press and hold the torch button, the machine will start welding with the
Start current
SCu . Second tact: release the torch button, after the time UP tuP
start the machine welding with the main welding current (100 %). Third tact:
press the torch button, after the time DOWN
tdo start the machine welding with
the End current ECu . Fourth tact: release the torch button, the machine will stop
welding.