Alfa IN aXe 250 mobil GAS, Инструкция по эксплуатации

Страница: 22 / 30

22/30
ALFA IN a.s. © www.alfain.eu
Display shows JOB off .
Symbols on the torch display H1
Symbol Description
A synergic program is running on the welding machine
Amperage setting (SYN)
Wire speed setting
No symbol
Material thickness setting (SYN)
Voltage setting (MAN)
Correction (SYN)
Symbols on the torch display H2
J.xx
JOBs (xx – JOB No)
I.xx
Choke level (SYN/MAN).
(Only with firmware 2015 and newer)
ELE
Machine is in MMA (Electrode) mode
RESET
1. Pressing V8 and V20 at the same time more than 3 s makes RESET –
default parameters will be restored.
2. It will delete saved JOBs!
8. MIG/MAG WELDING SYNERGY
1. Choose SYN method (see SETTING THE METHOD OF WELDING).
2. Left display V10 shows machine output (current, wire feed speed, material
thickness), right display V11 shows voltage value.
Correction value (voltage, wire feed speed) or choke value is shown on the
display
V11 only during the start process.
3. Press the button V8 to switch setting and view of machine output (current,
wire feed speed, material thickness).
4. Machine output (current, wire feed speed, material thickness) set by the
encoder
V5
.
5. In the calibration menu you can set the choice of turning off correction
zeroing at the change of the machine output value.