background image

aleo 

aleo solar Deutschland GmbH

 | Osterstraße 15| 26122 Oldenburg | 

Germany 

| [email protected] 

Page 56/60

 

installation instructions Edition 01/2012 en-GB-Intl (120508b) 

 

D.2.

 

Glossary 

Term 

Explanation 

Fire prevention 
switch 

Safety device that switches off 
electricity inside the building. A fire 
protection switch disconnects the 
photovoltaic generator at two poles. 
This means the voltage of the photo-
voltaic generator can no longer enter 
the building and the cables leading 
into the building are currentless. 
In the event of a fire, this fulfils an 
important safety function with respect 
to putting out the fire. 

Bypass element 

Internal component of an aleo module 
that keeps the reverse voltage of the 
cells in modules at safe levels when 
shadowing affects a module or parts 
thereof, thereby extending the service 
life of the module in the event of 
accidental shadowing. 
One or more bypass elements may 
exist for each module. 

DC isolator  

Safety device for safely switching off 
the electricity of the photovoltaic 
generator and the inverter on its DC 
side. A DC isolator separates the 
photovoltaic generator with two poles 
in such a way that both feed cables 
are not earthed. 
It therefore fulfils an important safety 
function during the installation and 
maintenance of a photovoltaic gene-
rator. 

MPP tracker 

Part of a photovoltaic system which 
ensures that, even with varying 
irradiation levels, the highest output is 
extracted from the photovoltaic gene-
rator as is possible under the present 
conditions. 
MPP trackers are often integrated into 
inverters. 

Photovoltaics 

The direct transformation of light into 
electrical energy with the help of solar 
cells. 

Photovoltaic system  A photovoltaic generator inclusive of 

its other components and safety 
devices such as inverters or DC 
isolators. 

Photovoltaic 
generator 

The entirety of all module strings that 
are connected to one of more inverter 
entries. 

 

 

Term 

Explanation 

String fuse 

An external component of a photovoltaic 
generator. This protects the solar modules 
in the event of failures (e.g. faulty inverter, 
lightning strike). Direct current string fuses 
also offer basic protection against stray 
currents and can help prevent fires. 
Local regulations may also stipulate the use 
of direct current string fuses. 

Solar module   A solar module is comprised of solar cells 

connected in series and is equipped with 
safety devices (bypass elements) integrated 
within the module. 
The cells are protected inside the module 
against the weather through a front pane 
and an insulating rear side. 
The modules described in this manual have 
a frame.  

 

Содержание S_16





























































Отзывы: