34
°C/°F
RESET
AA
1,5V
AA
1,5V
2. INSTALLATION
Attention: after the installation, it may take several hours up to a day before the correct values are
displayed. Additionally, after replacing exhausted batteries in the weather station, all measured data in the
weather station will be erased.
2.1 Power supply:
Advice regarding batteries:
We advise you to use normal 4 x 1.5V AA (LR6) alkaline batteries of high quality for the weather station.
Alkaline batteries with a capacity of 2000mAh have a lifespan of over one year. Rechargeable batteries are
not recommended because of their lower supply voltage.
Also the outdoor unit is powered by 2 AA 1.5V (LR6) batteries, but because normal Alkaline batteries
perform poorly or not at all at temperatures of around or below 0°C, it’s not recommended to use standard
Alkaline batteries for the outdoor unit. For that reason, we advise you to use Lithium batteries for the
outdoor unit that are designed to function well within a temperature range of -20°C to 60°C. These batteries
can be ordered via the service department of Alecto via internet: www.alecto.nl. Lithium batteries with
a capacity of 2900mAh have a lifespan of over one year. When the
icon appears in the display of the
weather station, the batteries of the outdoor unit need replacement.
40. wind vane
41. wind speed meter
42. outdoor unit support
43. rain meter
44. rain drain
45. post
46. plastic feet base
47. connecting cable (wind and rain sensor to outdoor
transmitting unit)
48. °C and °F selection button
49. outdoor unit reset button
50. connection for wind and rain sensor
51. outdoor unit battery compartment
52. outdoor temperature display
53. transmission indication
54. suspension hole
55. outdoor humidity
56. temperature sensor
57. humidity sensor
1.2 Outdoor unit and sensor unit:
49
50
48
51
56 57
52
55
53
54
40
41
42
43
45
46
47
44
Outdoor unit
Sensor unit
