![background image](http://html1.mh-extra.com/html/watchdog/3000-series/3000-series_quick-start-manual_3513301001.webp)
1 |
P a g e
WatchDog 3000 Series Wireless Rain Station - Quick
Start Guide
1.
Mount Rain Station to pole with U-bolts provided. Use ½ inch wrench to tighten nuts. Face solar
panel South in the Northern Hemisphere or North in the Southern Hemisphere.
2.
Attach paddle antenna to the top of the bracket by twisting it into SMA connector. Tighten
finger tight so that the antenna does not unscrew.
3.
Loosen the screws holding the Rain Bucket cover, rotate it slightly counter-clockwise, and lift the
cover off. Remove the rubber band from tipper spoons. Reinstall the Rain Bucket cover.
4.
Open bird guard packaging and follow instructions provided to assemble bird guard. Attach bird
guard to the top of the rain bucket.
5.
If using an external sensor, unlock the enclosure latches and open the front door of the
enclosure. Plug external sensor
into “EXT” port
and install sensor.
6.
Turn power switch inside enclosure “ON”.
7.
Configure the device with one of the two options: Bluetooth with phone or SpecConnect with
computer.
Bluetooth:
1.
Turn Bluetooth on by pressing and holding
the red “Select” button located inside the CAT M
enclosure for 5 seconds until the Status Light turns red.
2.
Open the Watchdog Mobile app and login with SpecConnect credentials.
3.
Tap the menu button on top left corner and select
“BLUETOOTH”
.