AL-238
PPROGRAMMING GUIDE
16
wireless code, the
operations are as below: input
：
09+01+1+#, when" wireless self-learning
entry"
is heard, to trigger wireless detector
twice, each time interval more than 2
seconds, the prompt "wireless self-
learning success" twice indicating
successful learning.If you want to delete
the wireless code of
zone 1, then input:
09+01+9+#
Settings
of
wireless
remote
control
10
00
Eliminate all
wireless remote
controls
Input Format
：
10+00+9#Eliminate all
encodes of remote controls;
01
wireless remote
control 1
Input Format
：
10+N+X+#
；
N indicates programming address
01~16, which means: remote control
1~16 learning code;
X means: X=1, start learning and wait for
the wireless remote control to be
triggered twice, each time interval more
than 2 seconds, the prompt "wireless
self-learning success" twice indicating
successful learning, and quit the current
self-taught programming.;
X=9 means clear the original learned
wireless code;
Within 30 seconds, if there is no button,
it will automatically exit the self-learning
mode;
For example: To learn the wireless code
of remote control 1, the operation is as
follows:
Input: 10+01+1+#, prompt "wireless self-
learning entry", press the wireless
remote control twice,each time interval
more than 2 seconds, the prompt
"wireless self-learning success" twice
indicating successful learning. To delete
the wireless code of the remote control
1, enter: 10+01+9+#, after the prompt
"Operation is successful";
02
wireless remote
control 2
.....
.....
16
wireless remote
control 16
Settings
of LORA
zones
11
00
Eliminate all
LORA zones
Input Format
：
11+00+9+# ,
eliminate all LORA zones
01
LORA zone 1
wireless
self-learning
Input Format
：
11+N+X+#
；
N indicates programming address
01~40
，
that means
：
zones 1~40
matching code study.
；
X means: X=1 to start learning, wait for
LORA self-study to report, after the code
is successfully, it will automatically exit
the current self-learning programming
；
X=9 means clear the original learned
wireless code;
Within 30 seconds, if there is no button,
it will automatically exit the self-learning
mode;
For example: To learn the wireless code
of LoRa zone 1, the operation is as
follows:
Enter 11+01+1+# in the programming
state to prompt "wireless self-learning
entry". At this time, the LoRa detector is
triggered and the prompt "wireless self-
learning successful" means the learning
is successful. If you want to delete the
wireless code of LoRa zone 1, enter
02
LORA zone 2
wireless
self-learning
…
…
…
40
LORA zone 40
wireless
self-learning
