Handheld fabric steamer
MODEL: XHD308
02/15
PRODUCT CODE: 44614
AFTER SALES SUPPORT
7
866-235-5029
USA
USA
Instructions
Instructions
Steaming fabrics and linens
NOTE: The water reservoir must be filled before proceeding with the following steps.
1.
Put the plug into an electrical outlet. The power indicator light will illuminate when the
steamer is switched on.
2.
The steamer will emit steam after approximately 3 minutes.
3.
Direct the steam nozzle towards the materials you want to steam.
4.
Keep the flow of steam focused on the material. Using a slight back and forth motion
will further enhance the steaming process.
Steaming garments
1. Place the garment on a clean hanger.
2. Start to steam from the bottom of the garment. The steam will rise along outside and
inside of the fabric, removing wrinkles. Continue to steam slowly from bottom to top of
the garment.
3. Point the steam away from the garment and smooth the fabric with your free hand.
4. Repeat the above steps as necessary until the garment is free of wrinkles.
Steaming tip
•
Steaming both sides of the fabric will help to remove stubborn wrinkles.
•
Delicate fabrics need to be steamed carefully to avoid damages caused by water
spotting.
•
Draperies and curtains can be steamed while still hanging. Precaution should be
taken while using a ladder or a step ladder. Do not use a stool, a chair or revolving
chair.
•
To steam towels, handkerchiefs and napkins hang them over a rod.
Removing the mineral build-up
The best way to avoid mineral build-up is using distilled or dematerialized water in your
steamer. It is not advised to use the municipal water because it is high in mineral content.
1. Unplug the steamer and allow it to cool down completely.
2. Empty the remaining water into a sink to minimize the mineral build-up.
3. Reattach the water reservoir cap.
Storage
•
Store the steamer and the supplied measuring cup together in one box.
NOTE: The original packing is a convenient storage box for your steamer.
•
Store the steamer in a cool and dry location.
