Alcorn Mcbride V+ series, Руководство пользователя

Страница: 92 / 276

5-10 Event Reference

Start
Starts a sequence. If the sequence is not currently running and was never paused
in the middle by a
Stop
event, the sequence will begin execution at the first
event. If the sequence started was running and is now stopped by some other
sequence, the sequence started will resume execution at the event. If the
sequence started is currently running and the setup for the sequence has Restart
Enabled, the sequence will stop event execution and restart execution from the
first event. If the sequence started is currently running and does not have
Restart Enabled, it will continue running as it was and the start event will be
ignored.
Event Syntax
Event Data1
Start Sequence Name

Stop
Stops a sequence at the current event. A Start event will cause the sequence to
resume from the point at which it was stopped.
Event Syntax
Event Data1
Stop Sequence Name

Pause
Causes a looping sequence to stop looping after the last event. If the sequence is
restarted, it starts execution from the first event.
Event Syntax
Event Data1
Pause Sequence Name

Reset
Stops a sequence immediately. If the sequence is restarted, it starts execution
from the first event.
Event Syntax
Event Data1
Reset Sequence Name

Goto
Unconditionally jumps over events. Only forward jumps are allowed.