Alcorn Mcbride V+ series, Руководство пользователя

Страница: 34 / 276

3-20 Show Control Overview
DayNightMode
DayNightMode will check the status of NightModeFlag and then either put the
system in Day Mode or Night Mode. You’ve probably been wondering “just
what are Day Mode and Night Mode?” We will Stop our video player in Night
Mode and Search our video player in Day Mode. We will search the video
player to the start of our presentation so we will have almost instantaneous
access to video playback when the operator pushes RunShowButton.
1. Select DayNightMode in Sequences of TUTORIAL then press Enter.
2. Enter the Events as follows:
3. Close the
[DayNightMode] of TUTORIAL
window.
MainShow
MainShow will play a two-minute presentation from our video player, starting at
the beginning of clip 1. If this were a real show, we would probably connect an
external sync cable between the video player and the Show Controller to provide
frame synchronization, but since this show is less than five minutes, clock drift
won’t cause more than a frame of inaccuracy, so we won’t use that feature.
At the end of our presentation, we’ll search back to the start and wait on the next
press of the button.
1. Select MainShow in
Sequences of TUTORIAL
then press Enter.
2. Enter the Events as follows: