Alcohol Countermeasure Systems Alcolock LR Скачать руководство пользователя страница 21

Страница: 21 / 72

INSTALLATION MANUAL

3. Connect the coiled end of the HS cable to the HS HDMI

port.

4. Use a tie wrap (27-000026) to neatly wrap the unused length of the HS

cable. Tuck the unused length of the HS cable under the dashboard, away

from vehicle components that move, or that are excessively hot.

5. Position the HS holder (58-000568) so that the HS will be easily accessible

to the driver.

ATTENTION! The HS holder and HS cable must not interfere with vehicle

operation.

6. Mount the HS Holder using an automotive fastening system (27-000028).

16.0 HS INSTALL PROCEDURE AND ITE INSTALL

TRANSACTION

After the ALCOLOCK LR device has been connected to the vehicle, perform

the HS install procedure by following the steps that appear on the HS screen.

The purpose of the HS install procedure is to activate the device and test device

functions.
The HS install procedure includes the following:

•

Entering the HS install procedure and testing device functions

•

Setting the tach threshold (or speed threshold for hybrid vehicles)

•

Setting the odometer reading

•

Performing an ITE install transaction

At the end of the HS install procedure, detach the HS from the vehicle and

connect it to a PC, via a Download Station (79-008952) or Universal Calibration

Station (79-007302), to perform an ITE install transaction. The ITE install

transaction programs the device.

ATTENTION!

•

Do not seal wiring until completing the HS install procedure and ITE install

transaction, taking a breath test, and attaching the security enclosure and GPS

antenna

•

Complete the HS install procedure on the HS display before performing an ITE

install transaction

•

Before beginning the procedure, ensure that there is sufficient ventilation for

vehicle exhaust fumes. Failure to do so may cause injury

•

Before beginning the procedure ensure that the vehicle is in the park / neutral

position, with parking brake engaged, to prevent the vehicle from moving

Содержание Alcolock LR









































































Результаты поиска

Содержание Alcolock LR

Отзывы:

Бренды по названию

Популярные бренды

Alcohol Countermeasure Systems Alcolock LR, Инструкция по установке и обслуживанию

Результаты поиска

Содержание Alcolock LR

Отзывы:

Бренды по названию

Популярные бренды