OmniSwitch 6850 Series Chassis and Hardware Components
OmniSwitch 6850-48
OmniSwitch 6850/6850E Series Hardware Users Guide
June 2011
page 2-27
Refer to the illustration below for more front panel information. For detailed LED descriptions, refer to
page 2-53
. For information on the chassis rear panel, refer to
page 2-55
.
OmniSwitch 6850-48 Front Panel
10/100/1000Mbps
The OS6850-48 provides 44 fixed 10/100/1000BaseT
(5–48) and 4 fixed 10/100/1000BaseT combo (1–4).
These are auto-sensing and auto-MDIX and use RJ-45
connectors.
Console Port
The OS6850-48 front panel provides one
RJ-45 port for console connections. Con-
sole connections are used by network
administrators for switch management.
This female RJ-45 connector provides a
DTE console connection.
Status and Slot Indicator LEDs
For detailed information on OS6850-48
status and slot indicator LEDs, refer to
page 2-53
.
OmniSwitch 6850-48
USB
Console
OK
PRI
PWR
BPS
CLASS 1 LASER PRODUCT
1 2 3 4
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48
USB Port
High speed USB port, which can be
used for quick upgrades.
Combo SFP
The OS6850-48 provides four combo SFP connectors for 1000Base-X high-
speed connections.
By default, when an SFP is installed in a combo port, it takes over the port num-
ber of the corresponding RJ-45 Ethernet port. In other words, if an SFP is
installed in the slot labeled 4, Ethernet port 4 is no longer available and cannot
be used for 10/100/1000 traffic. This default setting is referred to as “preferred
fiber.” Refer to “Configuring Ethernet” in the
Network Configuration Guide
for
detailed information, including steps for configuring combo port settings.
