OmniSwitch 6850/6850E Series Power Supplies
OmniSwitch 6850/6850E Series Power Supplies
OmniSwitch 6850/6850E Series Hardware Users Guide
June 2011
page 4-13
3
Carefully slide the power supply on to the power shelf and secure the power supply to the shelf using
the captive screws.
Attaching a Power Supply to the Power Shelf
Note.
A single large (i.e. 510W) power supply or up to two smaller (i.e. 126W) power supplies can be
attached to a power supply shelf.
4
After the rack-mount flanges and the power supply are secured to the shelf, mark the holes on the rack
where the shelf is to be installed.
5
Lift and position the shelf until the rack-mount flanges are flush with the rack post.
6
Align the holes in the flanges with the rack holes that were marked earlier.
7
Once the holes are aligned, insert a rack mount screw (not provided) through the
bottom hole of each
flange
. Tighten both screws until they are secure.
Attaching the Power Shelf to the Rack
Note
.
Be sure to install the screws in the
bottom hole
of each flange, as shown, before proceeding.
Tighten these screws
to secure the power
supply.
