Activating document converter software after a
completed installation
My Teamwork Licensing
............................................................................................................................................................................................................................................................
8AL90213USAC ed 01
September 12, 2008
4 - 1 3
............................................................................................................................................................................................................................................................
Note:
It may take up to 5 minutes for the virtual machine to initialize to a ready
state. All servers and watchdogs should eventually become green.
b. Using Internet Explorer on any client workstation, log into OmniTouch ACS as a
user. Select
Make a Presentation
and share one of each of the supported type of
documents (Word, Excel, and Powerpoint).
........................................................................................................................................................
E
N D
O
F
S
T E P S
Activating document converter software after a completed
installation
If you did not activate your Microsoft Windows XP Professional and your Microsoft Office
2007 during the installation process, you can use the following procedure to activate after
installation.
You will need a TightVNC listener installed on your client workstation and access to
TightVNC listener through any installed firewalls.
Note:
If you do not have TightVNC listener installed on your machine, you can use
one of the appropriate links at the bottom of the
Construct Document Conversion VM
page
(
Download Tight VNC for Windows XP
or
Tight VNC for other OS’s
) to
download and install the software and related instructions. Accept
ALL
defaults for
the Tight VNC installation.
To activate your document convertor software after an
installation has been completed
........................................................................................................................................................................................................................
1
Start a TightVNC listener session between your OmniTouch ACS server and your client
workstation.
Note:
You may need to set your client workstation’s firewall to allow VNC to
connect.
a. Start a VNC client listener on your client workstation.
