8AL90344ENAAed01
28
OmniTouch™ 8128 SE WLAN Handset
6.3.4
Start New Call During Conversation
NOTE: If configured in the Device Manager, it is possible to make an emergency call
while the handset/keypad is locked. During the ongoing emergency call, the soft
key “More” is disabled.
1
Press “More” during the call.
2
Select “New Call”. The first call is automatically put on hold.
3
Press “Select”.
4
Enter the number or pr press
to access the phonebook.
5
Press
, or “Call”.
6.3.5
Switch Between Calls
To switch between two ongoing calls:
1
Select the call on hold using the Navigation key.
2
Press the left soft key “Retr.”.
The retrieved call is indicated with
. The call on hold is indicated with
.
6.3.6
End Call
Prerequisite: A new call has been started during the conversation, see
1
Select the call to end by using Up and Down on the Navigation key.
2
Press the right soft key “End”. The selected call ends.
3
If needed, press the left soft key “Retr.” to resume the remaining call.
6.3.7
Transfer Call
Prerequisite: There are two ongoing calls.
1
Select the call on hold using Up and Downon the Navigation key.
2
Press “More”.
3
Select “Transfer to”. The two calls are connected. “Transferred” is displayed and
the handset enters idle mode.
6.3.8
Transfer to New Call
Prerequisite: There is one ongoing call.
1
Press “More” during the call.
2
Select “Transf. to new”.
3
Press “Select”.
4
Enter the number to which the other party will be connected. It is also possible to
make a phonebook lookup
to select a contact in the local phonebook and
the company phonebook.
5
Press “OK” or
to transfer the call.
