Alcatel-Lucent OmniTouch 8128 SE Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 63

background image

8AL90344ENAAed01

6

OmniTouch™ 8128 SE WLAN Handset

2.3

Regulatory Compliance Statements (USA and Canada only)

2.3.1

FCC and IC Compliance Statements

This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la Classe B conforme á la norme NMB-003 du Canada.

Privacy of communications may not be ensured when using this handset.

2.3.2

Exposure to Radio Frequency Signals

This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This device complies with FCC SAR limit of 1.6 W/kg. The
maximum SAR value measured when used at the ear is 1.38 W/kg. The telephone has
also been tested when worn on the body using belt clip. The maximum measured SAR
value in this configuration is 1.16 W/kg. This device must not be co-located or
operating in conjunction with any other antenna or transmitter.

Use of non-approved accessories may violate the FCC and IC guidelines for RF
exposure and should be avoided.

2.3.3

Information to User

This device complies with Part 15 of the FCC rules and with Industry Canada license-
exempt RSS standard(s).

Operation is subject to the following two conditions:

1

this device may not cause harmful interference, and

2

this device must accept any interference received, including interference that
may cause undesired operation.

Le présent appareil est conforme aux règles FCC partie 15 et aux CNR d’Industrie
Canada applicables aux appareils radio exempts de licence.

FCC ID: BXZWH1
IC: 3724B-WH1
US: 9FVIPNANWH1

HAC

«
...
10
11
12
13
14
...
»

Содержание OmniTouch 8128 SE
































































Отзывы:

Нет отзывов

Похожие инструкции для OmniTouch 8128 SE

Бренд: KCM Страницы: 93

Бренд: ALAN Electronics Страницы: 5

Бренд: Latte Страницы: 24

Бренд: Polycom Страницы: 8

Бренд: Sennheiser Страницы: 1

Бренд: Jabra Страницы: 80

Бренд: Hama Страницы: 27

Бренд: Geemarc Страницы: 1

Croise.R PBH-200

Бренд: Partron Страницы: 24

Бренд: Xiaomi Страницы: 20

Бренд: Jabra Страницы: 1

Бренд: Trust Страницы: 72

Бренд: Trust Страницы: 79

Бренд: Jabra Страницы: 11

Yealink SIP-T28P

Бренд: Yealink Страницы: 506

Бренд: Nacon Страницы: 30

Бренд: Cornerstone Страницы: 3

Бренд: RCA Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды