Alcatel-Lucent OmniSwitch 10K, Руководство пользователя

Страница: 77 / 96

Network Interface (NI) Modules Removing and Adding NI Modules
OmniSwitch 10K Hardware Users Guide August 2015 page 4-13
Removing a Module
To remove an NI module, follow the steps below.
1 Loosen the module’s two captive screws.
2
Simultaneously pull the two module lock levers—one on top of the module and one on the bottom—
until the module disengages from the chassis.
3
Slide the module out of the chassis.
Warning. Use caution when removing modules as some components may be hot.