Alcatel-Lucent OmniSwitch 10K, Руководство пользователя

Страница: 56 / 96

Installing CMM and CFM Modules Chassis Management and Fabric Modules
page 3-8 OmniSwitch 10K Hardware Users Guide August 2015
Console Port
Serial Connection to the Console Port
The console port, located on the CMM front panel, provides a serial connection to the switch and is
required when logging into the switch for the first time. By default, this R-J45 connector provides a DCE
console connection.
Serial Connection Default Settings
The factory default settings for the serial connection are as follows:
baud rate 9600
parity none
data bits (word size) 8
stop bits 1
X-ON/X-OFF enabled