DECT handsets Unified Support Tool
8AL90330ENADed01
16
/
25
4.4.1 Register the DECT Intercom
1. Connect the Intercom power supply => the green indicator light flashes quickly and the blue
indicator light is off.
2.
Remove the protective cover from the jack outlet and connect the jack adapter to the Intercom.
3. Connect the USB plug of the jack adapter to your PC. Note the COM port used when you connect
the USB connector, you will be asked for it later during the installation.
4. Select the port used by the jack adapter. If you have
not noted the port used when connecting the
adapter, you can find it in the list of devices
connected to your PC.
•
5.
Click on “Setup conn.” to establish the connection.
6.
Click on “Test” to test the connection. A message
informs you if the connection was successful.
If you have a problem while connecting the Intercom
to the PC, use the RTX EAI Port Server that comes with the Unified Support Tool during installation.
It allows you to verify the settings of the port used:
In the “General” tab, the checked option must be “UART”
In the “UART” tab, you can verify that you have selected the correct COM port number (“COM#”).
Also verify the transfer speed: “Speed = 115,200 bps”.
7. You can read the current configuration of the
Intercom by clicking on “Read”.
8. You can configure:
“Direct number”: the number called by the Intercom
when the call button is pressed (number defined in
the system, call pick-up or an external number).
“Ringer melody”: the ringing melody.
“Ringer volume”: the ringing volume.
“Speaker volume”: the volume of the loudspeaker.
Select “Send” to send the configuration to the
Intercom. A confirmation message appears.
9. If your system requests an AC code to register the
Intercom, enter this code in “AC”.
10.
Check the “Subscribe” option.
11.
Click on “Subscribe” to register the Intercom on your
system => The green light flashes rapidly
(registration in progress).
12. The phone is registered on the system, the green and blue indicator lights remain on. Disconnect
the Intercom by removing the jack outlet and replacing the protective cover on the jack outlet of the
Intercom.
6
7
8
9
1
0
11
12
13
