Getting to know your telephone - Phone description
8AL90391ENAAed01
8 /85
•
Access the phone local menu.
•
Confirm.
•
Navigate.
•
Left, right, up and down keys are used to define shortcuts
(3)
.
•
Move the cursor into a text.
•
Softkeys: access various functions according to the configuration and
the status of the handset.
In idle mode, the softkeys can be used for specific functions defined by
the user of the handset
(3)
.
•
Access the voicemail
(3)
.
•
Long press: lock/unlock keypad.
•
Short press in text mode: switch between lower case, upper case and
numbers.
•
Long press in idle state: access to the company directory
(1) (2)
.
•
Mute key
(3)
(in idle state): turn on/off audible signals.
•
Short press during incoming call (ringing): switch off ringer
(3)
.
•
Long press in conversation: activate/deactivate the mute feature
(3)
.
•
Volume up key: increase the volume of the ring tone during an incoming
call (8 steps) or increase the volume of the earpiece or loudspeaker
during a conversation (8 steps).
•
Long press in conversation: loudspeaker
(1) (2) (4)
•
Volume down key: decrease the volume of the ring tone during an
incoming call (8 steps) or decrease the volume of the earpiece or
loudspeaker during a conversation (8 steps).
•
Mute key
(1) (2)
: long press during conversation.
•
Mute key
(3)
:
o
In idle state: turn on/off audible signals.
o
Short press during incoming call (ringing): switch off ringer.
o
Short press during conversation: activate/deactivate the mute feature.
•
Push-to-Talk key
(1) (3) (4)
: used to activate the microphone during a PTT group call.
•
Earpiece speaker.
•
Microphone.
•
3.5 mm, 4-pole jack (TRRS standards: CTIA).
(1)
: The feature is only available when the handset is connected to OmniPCX Enterprise (NOE mode).
(2)
: The feature is only available when the handset is connected to OXO Connect (NOE mode).
(3)
: The feature is only available when the handset is connected to an SIP System (SIP mode).
(4)
: The feature is only available on the 8168s WLAN Handset.
(5)
: The feature is only available when the handset is connected to OmniPCX Enterprise and depends on
the system configuration. The administrator is able to configure this button through the WinPDM tool and
the OXE configuration menu (see TC2530). Contact your administrator for more information.