Using your telephone - SIP mode
8AL90391ENAAed01
45 /85
3.3.12 Answer an incoming call
A ring signal, a vibrating alert, or both can indicate an incoming call. The ring signal and vibration can be
disabled. The handset number or name of the caller is displayed. The name is displayed if the caller's
handset number is stored in the local phonebook.
You are receiving a call.
Press the accept call key.
Accept
Select the softkey:
Accept
.
Press the OK key.
Use the headset to take the call.
Press the loudspeaker key to answer in hands-free mode (8168s).
or
Decline
Decline the call (8168s Wlan Handset).
Depending on the configuration of the handset, a prompt invites you to decline the
call with a message.
Only the 8168s WLAN Handset permits handsfree mode.
The ringer does not ring if:
-
The vibrate mode is active, the vibrate mode active icon is displayed on the screen saver.
-
The ringer is disabled, the ringer disabled icon is displayed on the screen saver.
3.3.13 End the call
Use one of the following:
Press the end call key of the handset or headset.
End
Select the softkey:
End
.
3.3.14 Decline a call with a predefined message
This feature depends on the configuration of your device. Your administrator can define the template(s),
stored in your device.
You are receiving a call.
The following message is displayed if templates are defined:
Reply with a
message template?
Yes
A list of predefined messages is displayed.
Select a predefined message.
Edit the message if necessary.
Send
Select the menu:
Send
.
Send
Send the message.
3.3.15 Locking your telephone
Lock the keypad
This service enables you to prevent your phone being used.
During a conversation.
Press on the lock key, in idle state.
Lock
Lock the keypad.
Unlock keypad:
Long press on the # key (in idle state).
Yes
Apply.
