Using your telephone - OmniPCX Enterprise
8AL90391ENAAed01
16 /85
3
Using your telephone
Features depend on the connected system. Contact your administrator to find out which system your phone
is connected to:
•
OmniPCX Enterprise (OXE).
•
OXO Connect (OXO).
•
SIP System (SIP).
3.1 OmniPCX Enterprise
This section describes how to use your telephone connected to OmniPCX Enterprise. Some features are
subject to programming and are marked by an asterisk (*). If necessary, contact the administrator of the
system.
3.1.1 Making a call
Use one of the following:
Dial directly the number for your call.
Dial.
The call is automatically started when number is entered.
Only the 8168s WLAN Handset permits hands-free mode.
End the call:
You are in communication.
Hang up.
To make an external call, dial the outside line access code before dialing your contact number.
3.1.2 Answer an incoming call
A ring signal, a vibrating alert, or both can indicate an incoming call. The ring signal and vibration can be
disabled. The handset number and name of the caller are displayed.
You are receiving a call.
Press the 'take the call' key.
OK
Select the softkey:
OK
.
Press the OK key.
