During a conversation - OmniPCX Enterprise
8AL90391ENAAed01
48 /85
4
During a conversation
4.1 OmniPCX Enterprise
This section describes features during a conversation when connected to OmniPCX Enterprise. Some
features are subject to programming and are marked by an asterisk (*). If necessary, contact the
administrator of the system.
4.1.1 Adjust audio volume during a call
Use the volume up and down keys or navigation up and down keys to increase and decrease the volume
during a call (8 steps).
4.1.2 Activate/deactivate voice frequency
This feature depends on the system configuration. If necessary, contact your administrator. During a call,
you sometimes have to send DTMF signals, for example, for a voice message service, an automatic
switchboard or when remotely consulting an answering machine:
To activate:
During a conversation.
Menu
Open the system menu by selecting the softkey.
Send DTMF
Activate voice frequency.
The function is automatically cancelled when you hang up.
To deactivate:
During a conversation.
Menu
Open the system menu by selecting the softkey.
Deactive DTMF
Deactivate voice frequency.
4.1.3 Microphone switched off during calls (mute)
Mute the micro so that your contact can no longer hear you.
During a conversation.
Long press on the volume down key.
Your caller can no longer hear you. The following icon is displayed in the status
bar:
.
Follow the same procedure to switch on the microphone. You can be heard and the 'mute' icon disappears
from the display.
4.1.4 Activating/deactivating the loudspeaker (8168s Wlan Handset)
Activate or deactivate the loudspeaker when you are in conversation using the handset or the headset.
During a conversation.
Long press on the volume up key.
The following icon is displayed in the status bar:
.
Adjust volume by pressing the volume keys (number of levels: 8).
Follow the same procedure to deactivate the loudspeaker.