EN
Alternating red and blue LED indicate headset
has entered into the pairing mode and ready to
be detectable for the first time.
Blue LED flashing slowly indicates the device is
powered on and connected.
Solid red LED indicates the battery is charging.
Bluetooth Headset
Quick Guide
v1.0
Article: CNA-BTHS02x
Package Contents
1.
BT headset
2.
Quick Guide V1.0
3.
USB2.0 charging cable
4.
Warranty Card
Hardware Overview
Specification
Bluetooth Specification v3.0+EDR compliant
RF Frequency Range: 2.402-2.480GHZ, 2.4G ISM band
Frequency Response: 20 Hz – 16,000 Hz
Very high Signal to Noise Ratio (SNR):90 dB
Working distance : 10-15 M
Total Harmonic Distortion (THD): 0.08%
LED Indicator Status: Blue, Red
Rechargeable 360mAh Li-Polymer Battery: 3.7V 360mA
1.
LED LIGHT
2.
Power button ON/OFF (press the
button down for long time)
Volume up/down (Up switch the
button mean ; the headset
will make a beep if the volume are on
full blast; Down switch volume-, the
headset will also make a beep if the
volume are on min.)
Previous/Next (press the button
up/down for long time)
Play/Pause (when listening the
music, press button one time, the
music will be paused, press again,
the music will go on)
3.
USB interface for charging
4.
Microphone
