17
Understanding Banks
Service Banks
The scanner is preprogrammed with all the frequencies
allocated to the aircraft band and FM CB.
Channel-Storage Banks
To make it easier to identify and select the channels you want
to listen to, the 200 channels are divided into 10
channel-storage banks. Each bank has 20 channels. Use
each channel-storage bank to group frequencies, such as
those for the amateur radio, air crafts, police, fire brigade,
public utilities etc (Please note that in some countries You are
not allowed to listen to certain services, and having saved
such frequencies into a memory location can be regarded
already as an offense).
For example, the police department might use eight
frequencies in your town while the railroad uses an additional
four. You could program the eight police frequencies starting
with Channel 1 (the first channel in bank 1), and program the
railroad frequencies starting with Channel 21 (the first channel
in bank 2).
Operation
Turning the scanner on and setting squelch
Note:
Make sure the scanner's antenna is connected before
you turn it on.
•
Turn
Squelch
fully counterclockwise.
•
Press and hold for about 2 seconds to turn the
scanner on.
•
Then turn
Volume
clockwise until you hear a hissing
sound.
•
If the scanner is scanning, press
Hold
to stop
scanning, then turn
Squelch
clockwise until the
hissing stops.
Storing known Frequencies into Channels
•
1) Press
Hold
. Then enter the channel number
where you want to store a frequency, then press
Func
and
Pgm
. The channel number appears.
•
2) Use the number keys and
●
/Clr
to enter the
frequency (including the decimal point) you want to
store.
•
3)Press
E
to store the frequency into the channel.
Notes:
•
If you entered an invalid frequency,
Error
appears and
the scanner beeps three times. Enter a valid
frequency.
•
The scanner automatically rounds the entered number
to the nearest valid frequency.
•
For example, if you enter 28.473 (MHz), your scanner
accepts it as 28.475.
