22
•
Press
Func
+
or
Func
+
. The scanner searches,
starting from the frequency you entered in the step
before.
•
If you enter a frequency that is out of range, the scanner
sounds an error tone and
Error
appears.
•
Press
Func
+
to change the search direction
downward or
Func
+
to change the search direction
upward. Frequencies appear during the search.
Notes:
•
You can set the delay function on or off during the search
or while the search stops.
•
You can skip a frequency when the search stops. After
the search skip frequency is set, the scanner starts direct
search again.
Direct Entry Search Hold Mode
•
To stop searching during direct entry search, press
Hold
.
Hold appears.
•
In this mode, pressing
Func
+
changes the search
direction downward and pressing
Func
+
changes
the search direction upward.
•
or
appears depending on the search direction.
•
Press
Func
+
to decrease the frequency by one step
or
Func
+
to increase it by one step.
•
Hold down
or
for about 1 second to quickly increase
or decrease the frequency.
•
To resume direct search, press
Func
+
Src
or
Hold
.
or
appears on the display, showing the search
direction.
Storing Frequencies found during Direct Entry Search
into Channel Memory
Follow these steps to store frequencies received during direct
entry search mode or direct entry search hold mode.
•
Press
Func
+
Pgm
in direct entry search mode or direct
entry search hold mode. The frequency and lowest blank
channel alternate on the display.
•
Press
E / Pgm
to store the frequency into the blank
channel. To select another channel, repeatedly press
Func +
or
Func +
to select the blank channel you
want, then press
E / Pgm
. You can also use the
0-9
keys
to select the bank.
If you enter a frequency that has already been entered
elsewhere, the scanner sounds an error tone and displays the
channel that was duplicated.