Alber viamobil eco, Руководство пользователя

Страница: 24 / 37

8 2
6. Handle Bar Settings
Your specialist dealer is responsible for delivering viamobil, assembling individual
components and attaching the device to the wheelchair. This specialist dealer will
adjust the device, especially the handle bar [8], individually to suit the height and
ergonomic needs of the user.
If, for example, readjustment to the handle bar [8] becomes necessary due to there
being a change of user, you can authorise your specialist dealer to carry out this
adjustment or carry out the adjustment yourself as follows:
Release the clamping screw [10] located in the clamping yoke [9] with a hexagon
socket screw key (key width 6mm) and remove.
Turn the handle bar [8] into a comfortable position for the user.
Retighten the clamping screw [10] in the clamping yoke [9] with 8 Nm torque
when you have attained the required position.
For this you should once again use the hexagon socket screw key with a 6 mm key
width.
If the adjustment alternative is not low enough, then the handle bar [8] can be
completely removed and reinstalled after being turned 180 degrees. This results in a
lower operating position.
Release the clamping screw [10] located in the clamping yoke [9] with a hexagon
socket screw key (key width 6mm) and remove.
Move the clamping yoke [9] upwards.
Remove the handle bar [8] from the headset [11].
Turn the handle bar [8] 180 degrees and reinsert it into the receiver on the head-
set [11].
Close the clamping yoke [9] and screw together using the clamping screw [10]
with 8 Nm torque.
For this you should once again use the hexagon socket screw key with a 6 mm key
width.
•
•
•
•
•
•
•
•
10 9
8
10 9
8
10
9
8
10
9
8
10
9
11
10
9
11
GA-V14-USA.indd 21 18.09.2006 11:51:39