Alber viamobil eco, Руководство пользователя

Страница: 14 / 37

8
Kerbs have to be crossed in backwards drive with the viamobil swit-
ched off.
The wheelchair is to be lifted on its handles (not by the handles of
the viamobil).
Pay attention to the maximum climbing height as stated by the
manufacturer of the wheelchair as well as the instructions in chapter
0.2 when driving over kerbs.
Pay attention to the signals on the LED status display [3] (see also
chapter 7.2) during the trip. This shows when the rechargeable bat-
tery pack of your viamobil is empty by presenting a steady blinking
light. You should then finish driving as quickly as possible. If this
is not possible, you should preferably switch off your viamobil (see
chapter 2.7) and retract the drive wheels (see chapter 2.8). You can
thus push the wheelchair without the support of the viamobil.
2.7 Finishing Driving
After you have finished driving, you should always switch off your viamobil in order
to not unnecessarily drain the battery.
Turn the operating button [12] to setting „0“; the LED status display [13] goes out.
After you have finished driving, you should always switch off your viamobil in order
to not unnecessarily drain the battery.
Turn the operating button [12] to setting „0“; the LED status display [13] goes out.
12 13 12 13
GA-V14-USA.indd 11 18.09.2006 11:51:27