Alber viamobil eco, Руководство пользователя

Страница: 22 / 37

8 9
5.2 Assembling viamobil Handle Bar
Release and remove the clamping screw [10] from the clamping yoke [9].
Open the clamping yoke [9] with a hexagon socket screw key (key width 6mm) and
insert the handle bar [8] into the receiver on the headset [11] to correspond with
the marking you previously made (see chapter 5).
Close the clamping yoke [9] and screw together using the clamping screw [10]
with 8 Nm torque. For this you should once again use the hexagon socket screw
key with a 6 mm key width.
Slide the hand grips into the drive unit.
Screw the hand grips and the drive unit together using the hand wheel [6].
Insert the rechargeable battery pack into the drive unit (see chapter 3.1).
Your viamobil is now ready for operation again.
Please pay attention to the instructions in chapter 6 provided that a
readjustment of the handle bar [8] seems necessary.
•
•
•
•
•
•
8
11
8
11
10 9
8
10 9
8
66
GA-V14-USA.indd 19 18.09.2006 11:51:37