Alber e-fix eco, Инструкция по эксплуатации

Страница: 14 / 53

8 9
The system needs to be switched off before attaching the e-fix wheels to the wheelchair.
It must not be possible to remove the e-fix wheels from the wheel retainer [2] without pressing the release
mechanism [6]. Travel is only permitted with e-fix wheels that are correctly engaged in the wheel retainer [2].
Before every trip, check that your wheelchair parking brakes are working correctly. These need to be correctly
adjusted to the e-fix wheels and be able to prevent the wheelchair inadvertently rolling away at any time.
2.2 Switching on the system
If the two e-fix wheels, as described in chapter 2.1, have been correctly attached to your wheelchair and are engaged, you can now switch
on the system using the control unit [20] (see chapter 5.2.1) and start using your wheelchair.
If you are not yet familiar with the e-fix and its travel characteristics you should start by reducing the maximum
speed to a minimum using the rotary switch [29] (see chapter 5.2.6).
When travelling with the e-fix you must observe the safety instructions and hazard information in chapter 3.
When starting up the system for the first time, the language selection menu (see chapter 5.4) will appear when
you switch on the control unit. You can set your desired language in this menu.
2.3 Switching off the system
Once you have completed your trip and will not be using your wheelchair for a long period of time, you should always shut down the e-fix.
Firstly, this saves energy and secondly, the e-fix is not inadvertently deployed by accidentally touching the joystick. Read more about this
in chapter 5.2.2
i