Alber e-fix eco, Инструкция по эксплуатации

Страница: 36 / 53

8 31
5.4 Setting the local language when starting up the e-fix for the first time
When starting up the e-fix for the first time you need to set the desired language. This
step is generally carried out by your specialist dealer before delivering the e-fix. If this is
not the case, please proceed as follows:
•
Turn on the control unit by pressing the on/off button [26]. The display [25] first
shows the e-fix start screen for about 3 seconds and then shows the
language selec-
tion menu illustrated in the adjacent diagram (with "Deutsch" [German] displayed).
•
Moving the joystick [21] to the left or right displays the available language variants in
the selection field [56] of the display.
•
When the language you desire is displayed you need to press button [22] on the con-
trol unit. This permanently saves the selected language. You are then returned to the
user menu automatically.
•
By pressing button [24] you can skip the language selection. However, when you next
start up the system the language selection will be displayed again.
•
You can change the selected language at any time, see chapter 5.3.7 for more details.
If you did not save any language when you first started up the e-fix,
the language selection screen will be displayed again when you next
switch on the control unit.
If you have any problems setting the language, please contact your
specialist dealer.
5.5 Travel parameters
The control unit software contains various travel parameters which your specialist dealer
can adjust to your individual needs and requirements.
If the travel characteristics have been customised to your individual requirements, the
travel mode menu (see chapter 5.3.4) and the user screen indicate CUSTOM. In this case
you cannot select any other travel modes.
i
i