Albemarle 280 EXPRESS FISHERMAN, Руководство пользователя

Страница: 52 / 124

280 Series Express Fisherman
52
pump will shut off. When the washdown hose is in use and
the pressure drops, the pump will turn on.
The raw water washdown system is equipped with a strainer
on the intake side of the pump located in the bilge below the
cockpit fishbox. This should be checked frequently and cleaned
as necessary.
The Washdown Hose Connection
The washdown faucet is located in the starboard rear of cock-
pit and uses a standard garden hose connection. It is equipped
with a valve that allows the flow of water to be turned on or off
at the hose connection.
ALWAYS TURN THE RAW WATER PUMP SWITCH/
BREAKER TO THE “OFF” POSITION WHEN
LEAVING THE BOAT UNATTENDED.
6.3 Livewell (Optional)
Seawater is provided to the livewell pump by the same thru-
hull fitting that supplies the raw water washdown. This pump
is designed to carry a constant flow of water to the livewell.
There is a sea strainer on the intake side of the pump located in
the bilge below the cockpit fishbox. This should be checked
frequently and cleaned as necessary. The pump is activated
by the Livewell switch in the helm switch panel.
An overflow tube in the drain fitting automatically controls
the water level in the livewell. Always turn the pump off
when the livewell is not in use.
To fill the livewell, insert the overflow tube into the drain fit-
ting at the bottom of the livewell. Make sure the valve at the
intake thru-hull fitting is open and activate the Livewell switch
in helm switch panel. When the water level reaches the over-
flow, it will begin to circulate.
To drain the livewell, turn off the livewell pump and pull out
the overflow tube in the drain fitting at the bottom of the
livewell. When the livewell has completely drained, use the
washdown hose to flush the livewell and drain of debris.
Note: Do not use the livewell as a dry storage area when
it is not in use. Seawater could accidently be de-
livered to the livewell from the thru-hull fitting and
damage equipment stored there.
ALWAYS TURN THE LIVEWELL PUMP SWITCH TO
THE “OFF” POSITION WHEN LEAVING THE BOAT
UNATTENDED.
6.4 Air Conditioning
The air conditioner is self-contained and seawater cooled. An
AC centrifugal raw water pump supplies seawater that cools
the condensing unit as it circulates through the system and is
discharged overboard. The pump is located in the bilge below
the cabin steps. It is activated whenever AC current is avail-
able and the air conditioning system is operating.
Seawater is supplied to the pump from a thru hull fitting lo-
cated in the hull near the pump. A sea strainer between the
pump and thru hull fitting protects the system from contami-
nants that could damage the pump or the air conditioning sys-
tem. Make sure the seawater pump receives adequate seawa-
ter by periodically cleaning the sea strainer basket. The pro-
cedure for cleaning the strainer is the same as for the engine
strainers.
You should refer to the air conditioner owner's manual for more
information on the operation and maintenance of the air con-
ditioner.
Livewell and Stand pipe