Alba LE-28GA06-B3+DVD, Инструкция по эксплуатации

Страница: 41 / 80

41
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105.
TV systems management
Let’s get started
Analogue Manual Tuning
(only available in ATV mode)
IMPORTANT: This feature is not available in the UK as
analogue signals are no longer broadcast.
1. Press the buttons to select Analogue Manual
Tuning and press OK to display the menu.
2. Use buttons to select the desired option and then
use buttons to set each option.
Storage: Select the storage location of the channel
System: Select system between I / DK / L / M / BG
Current CH: Display the current channel information
Search: To search through the different frequencies until
you find the program you want.
Fine-Tune: select FINE-TUNE to do small adjustments to
improve the signal
IMPORTANT: If the number about to save is the same
as a channel that is already being used, the manually
adjusted channel will replace the existing channel.
Digital Manual Tuning
1. Use the button to select Digital Manual Tuning
and press
OK
on the remote control to display the
submenu.
2. The Digital Manual Tuning menu will now display.
3. Press the buttons to select the desired UHF
channel.
4. Press the OK button and the search for available
stations on that channel will begin.
5. Once the signal has been tuned the signal strength will
be displayed on the screen.
6. The menu will close and the tuned channel will be
shown on your TV screen.
Adjust
Frequency 867.875 MHz
Storage To 1
Analogue Manual Tuning
Search
Current CH 1
System BG
Back
MENU
Fine-Tune
Move
Adjust
Bad Normal
Frequency 474 MHz
NO SIGNAL
UHF CH 21
Digital Manual Tuning
Data
Radio
DTV
0
0
0
Good
Back
MENU
TV systems management