Alba LE-28GA06-B3+DVD, Инструкция по эксплуатации

Страница: 38 / 80

38
TV systems management
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
TV systems management
Let’s get started
PICTURE MENU
This menu allows you to select the best preset picture
mode or change them yourself.
Note: The menu shown in the diagram has been
extended to show all available options. You will need to
use the buttons to scroll through the menu to view
all of the options.
1. Press MENU button to display the main interface, then
use buttons to navigate and select PICTURE
menu and press OK button to enter.
2. Press buttons to select the following options and
use buttons to adjust each option’s setting.
Picture Mode: Choose between Dynamic / Standard /
Movie / Personal modes.
Contrast: Adjusts the difference between light and dark
levels in the picture.
Brightness: Increases or decreases the amount of white
in the picture.
Colour: Adjust the value of colour.
Sharpness: Adjust the level of crispness in the edges
between light and dark areas of the picture.
Colour Temp: Choose between Cool/Normal/Warm. The
colour temp changes the amount of blue and red in your
picture.
Aspect Ratio: Choose to view the TV picture in various
formats. Choose from AUTO / 4:3 / 16:9 / Zoom 1 /
Zoom 2.
Advanced Settings ： Adjust the following options: Noise
Reduction, White Balance, Blue Screen, Backlight,
Gamma and Reset.
Select
Move
Exit
Picture Mode
PICTURE
Standard
Movie
1/8
Dynamic
Adjust
OK EXIT
Contrast
50
Brightness
50
Colour
50
Sharpness
50
Select
Move
Exit
Advanced Settings
PICTURE
Colour Temp
Normal
Aspect Ratio
16:9
6/8
Adjust
OK EXIT
Cool Warm