Alaxala AX6300S series, Руководство пользователя программного обеспечения

Страница: 79 / 522

4. QoS
63
Impact on communication
None
Response messages
Table 4-10: List of response messages for the show qos queueing distribution command
Limit_Qlen= <queue length> Limit of the number of in-use packet buffers in a
queue
Statistics discard Queuing priority
•
For details about queuing priority, see the
description about the number of discard classes in
Table 6-35 Correspondence between NIF models
and send control functionality (2 of 3) in the
manual Configuration Guide Vol. 2 For Version
11.7 and Table 6-36 Correspondence between
NIF models and send control functionality (3 of 3)
in the manual Configuration Guide Vol. 2 For
Version 11.7 in 6.10 Correspondence between
NIF models and send control functionality in the
manual Configuration Guide Vol. 2 For Version
11.7 .
send_pkt Number of packets accumulated in a queue
discard_pkt Number of packets discarded without being
accumulated in a queue
send_byte Number of bytes in packets accumulated in a queue
(unit k indicates 1024, M indicates 1024
2
, and G
indicates 1024
3
).
The range from the MAC header to DATA and PAD
(excluding FCS) is included.
total Total of the items (unit k indicates 1024, M indicates
1024
2
, and G indicates 1024
3
).
Message Description
Can't execute this command in standby system. This command cannot be executed on a standby system.
Can't execute. The command could not be executed.
There are no active BSUs, CSUs, and MSUs. Make sure at least
one BSU, CSU, or MSU is active before re-executing the
command.
Illegal NIF -- <nif no.> . The specified NIF number is invalid. Make sure the specified
parameter is correct, and then try again.
<nif no.> : NIF number
Illegal Port -- <port no.> . The specified port number is invalid. Make sure the specified
parameter is correct, and then try again.
<port no.> : Port number
No operational port. There is no port that is active. Make sure the specified NIF is
active, and then re-execute the command.
No support parameter -- <parameter> . The specified parameter is not supported. Make sure the
specified parameter is correct, and then try again.
<parameter> : Parameter
Item Displayed information
Detailed information Meaning