Alaxala AX6300S series, Руководство пользователя программного обеспечения

Страница: 232 / 522

7. MAC-based Authentication
216
commit mac-authentication
Saves the internal MAC-based authentication DB for MAC-based authentication to the internal
flash memory.
The contents of the internal MAC-based authentication DB which is being used is not overwritten
unless this command is executed after the following commands are executed to add or delete MAC
addresses:
•
set mac-authentication mac-address
•
remove mac-authentication mac-address
Syntax
commit mac-authentication [-f]
Input mode
Administrator mode
Parameters
-f
Stores the internal MAC-based authentication DB for MAC-based authentication to internal
flash memory without displaying a confirmation message.
Operation when this parameter is omitted:
A confirmation message is displayed.
Example
The following shows an example of saving the internal MAC-based authentication DB for
MAC-based authentication:
# commit mac-authentication
Commitment mac-authentication mac-address data. Are you sure? (y/n): y
Commit complete.
Display items
None
Impact on communication
None
Response messages
Table 7-17: List of response messages for the commit mac-authentication command
Message Description
Can't execute this command in standby system. This command cannot be executed on a standby system.
Can not commit. An attempt to update the authentication information failed.
Execute the
restart mac-authentication
command to
update the authentication information again.
Can't execute. The command could not be executed. Re-execute the command.
Command information was damaged. Information was discarded because the execution information is
corrupted.