Alaxala AX6300S series, Руководство пользователя программного обеспечения

Страница: 302 / 522

10. Redundancy of BCUs, CSUs, and MSUs
286
If
y
is entered, synchronization starts.
If
n
is entered, the user is returned to the command prompt without performing
synchronization.
#
Display items
None
Impact on communication
None
Response messages
Table 10-4: List of response messages for the synchronize command
Notes
1. When executing this command, do not allow another user to log in, log out, or execute a
command. Otherwise, the command might not be terminated correctly.
2. This command cannot be executed if the versions of software for the active system and the
standby system do not match. Note, however, that the command can be executed regardless
of the software versions if the
account
parameter is specified.
3. If there are differences in user accounts, they become the same as the user account which is
currently used. As a result, a user account for the standby system might be deleted.
4. Depending on the size of the configuration file or the number of files in the home directory,
it might take time to execute the command.
5. If the
diff
parameter is specified, the
.clihistory
file in the home directory is also
compared. Therefore,
NG
might be displayed for the
home directory
item.
Message Description
Can't execute because operation mode is simplex
now.
The command cannot be executed because the system is in simplex
mode.
Can't execute for software version mismatch. The command cannot be executed because the versions of software
do not match.
Can't execute this command in standby system. This command cannot be executed on a standby system.
Can't execute. The command could not be executed. Re-execute the command.
Now another user is executing user account
command, please try again.
Another user is executing a user account related command.
Re-execute the command after the related command completes.
Now switchover executing. The command can not be executed because the system is being
switched.
Synchronization files copy failed. An attempt to copy the file to be synchronized failed. Wait a while,
and then re-execute the command.
Note, however, that if this response message is output with the
No
space left on device
message, follow the step 7 in Notes below
to re-execute the command.
Synchronization files open failed. An attempt to open the file to be synchronized failed. Re-execute
the command.
The command execution failed, because
configuration file is editing.
This command cannot be executed because another user is editing
the configuration.
There are some mismatch items. Some items do not match.