Section 4
Installation
4.1 Mounting
The FAIM mounts to the back of a metal enclosure or onto the accessory board
space on a listed AlarmSaf power supply.
4.1.1 Mounting to the back of an enclosure
1. Install four 6-32 x 3/4” Female-Female standoffs on the appropriate mounting
studs in the enclosure (the aluminum standoff, if present, is installed on the
top left mounting stud).
2. Place the FAIM onto the standoffs and secure using the included 6-32 x 3/8”
screws.
3. Connect ABC cable(s) appropriately (See section 3.3)
4.1.1 Mounting to an approved power supply
1. If not already present, install the four 6-32 x 3/4” standoffs to the power
supply (the aluminum standoff, if present, is installed on the top left mounting
stud).
2. Place the FAIM onto the standoffs and secure using the included 6-32 x 3/8”
screws
3. Connect ABC cable(s) appropriately (See section 3.3)
FAIM Installation Instructions
2009/10/30 16:12:34
52-382 Rev A.01
Page 10 of 15
AlarmSaf
65A Industrial Way, Wilmington, MA 01887 978 658 6717 www.alarmsaf.com
