Alarko ADK 200, Руководство по эксплуатации

Страница: 31 / 38

Starting The Boiler
CHECKINGS AND STARTING the BOILER
Pre Controls
Following controls must be done before starting the boiler. If there are any problems
or failure, boiler must not be started.
All other connections must be controlld according to the system options.
29
•
Water level of the boiler must be controlled. Water must be added to the
boiler if the water level is low.
•
Please call Alarko Carrier technicians if there is a water leakage. Leakage
must be prevented before starting the boiler. If there is a leakage in the
plumbing system, boiler must be started after repair.
•
Flue connections must be controlled. Boiler must not be started before
repairing the connection if there is a problem.
•
Area must be properly air conditioned.
•
Gas valves must be checked as if they are on if gas fuel is used in the
boiler.
•
Liquid fuel level of the tank must be controlled and fuel valve must be
opened if liquid fuel is used in the boiler. Fuel-burner connection must
be controlled. If there are any problems filters must be cleaned.
•
Working and the directions of the pumps must be controlled.
•
Electric system of the control panel must be controlled.
•
All water and gas valves of the boiler must be opened.
•
Turn the main electric switch of the boiler room on. Working lamp will
be on.
•
Start the circulation pump.
•
Turn the ‘’on/off ‘’ switch of the burner to the mode ‘’on’’ (Check the
burner instructions manual).
•
The indicator light will be on.