Alarko ADK 200, Руководство по эксплуатации

Страница: 11 / 38

9
GENERAL CHARACTERISTICS of ADK 200 BOILERS
ADK 200 boilers are, blowing burner, cast iron sectioned, between the capacities
163-355 kW with proper burner connection, works with gas or liquid fuel in 7
different (5-11 sections) type.
ADK 200 boilers operating pressure is 6 bar maximum, and working temperature
is 90°C maximum.
In ADK 200 boilers, heat transfer surface areas are increased by the special
wings in the burning room and chimney ways. This inceases the high heat transfer
ability of cast iron boiler to the maximum level.
ADK 200 boilers are cast iron sectioned boilers. This brings easy assembling
and easy capacity increasing by adding sections to the boiler. The transportation
and set up of the boiler is easy because boiler is assembled in boiler rooms. It is
easily to carry or shift position without breaking walls etc.
ADK 200 boilers are casted with special alloy, which is durable for heat extansions
and changes, EN GJL 200. They are long life boilers according to this special
cast iron alloy.
With the help of vertical and three pass specially designed sections burning gases
pass three times in the boiler and transmits burning energy to the water inside
the sections at high level.
ADK 200 boilers are high efficiency boilers (According to the fuel bottom heating
value % 91-93).
With this high efficiency and perfect isolation more energy is gained with less
fuel. Heat loses are minimized on ADK 200 boilers.
By appropriate burning room, heat transfer surface, turbulator, collector and
isolation high heat transfer and optimum flue gas emition results are provided.
Delivery Conditions
Boiler sections are delivered as assembled or not assembled according to the
boiler room specifications and dimensions. In not assembled deliveries, sections
and assembling aparats are delivered on a pallet, cabins,isolation and other
elements are delivered in a box. Alarko Carrier technicians make the assembling
of the boiler.