52
MAINTENANCE
B.
Test Procedure
1.
Power up the Unit Under Test (UUT),
2.
Press the MORE OPTIONS key.
3
Press the CONFIG soft key.
4.
Press the SELECT soft key twice to highlight the Set up line
option.
5.
Press the
↑
arrow soft key to toggle setting to Y
Ye
ess.
6.
Press the ENTER soft key to accept setting.
7.
Set the meniscus level to 0 in the burette.
8.
Press the A key to select Channel-A.
9.
Press the SELECT soft key 4 times to highlight Setup option.
10. Press the
↑
arrow soft key to toggle setting to S
Se
elle
ecctt V
VR
R a
an
nd
d
T
Tiim
me
e..
11. Press the ENTER soft key to accept setting.
12. Press the SELECT soft key to highlight P
Prrii V
Vo
ollR
Re
em
m ((V
VR
R)).
13. Press the
↑
arrow soft key until the (VR) is set to 18 ml.
14. Press the ENTER soft key to accept setting.
15. Press the SELECT soft key to highlight P
Prrii T
Tiim
me
e ((T
TR
R)).
16. Press the
↓
arrow soft key until the (TR) is set to 00h 03m.
17. Press the ENTER soft key to accept setting.
18. Press the CLEAR soft key to set the "Pri Vol Inf (VI)" to 0ml.
19. Press the ENTER soft key to accept setting.
20. The Primary Rate should read 360 ml/h.
21. Press the START/STOP key to start Channel-A. Channel-A will
run for 3 minutes.
22. Press the START/STOP key within 1 second after the channel
goes into KVO alarm.
23. The volume collect will be between 17.1 ml and 18.9 ml.
24. Repeat steps 7 - 23 for Channels B and C.
25. After testing all three channels repeat steps 1-6 with the
exception in step 5 to toggle setting to N
No
o.
New Instrument Volume Accuracy Test (Continued)
Содержание MedSystem III
Страница 37: ...34 GETTING STARTED T H I S PA G E I N T E N T I O N A L LY L E F T B L A N K...
Страница 45: ...T H I S PA G E I N T E N T I O N A L LY L E F T B L A N K 42 ALARMS ADVISORIES AND PROMPTS...
Страница 61: ...58 MAINTENANCE T H I S PA G E I N T E N T I O N A L LY L E F T B L A N K...
Страница 63: ...T H I S PA G E I N T E N T I O N A L LY L E F T B L A N K 60 MAINTENANCE...
